Sunday, July 31, 2011

Mechatronics Technician-Job Code: CIK-2006

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
Identifies trouble areas and determines corrective action. Observes electro-mechanical and hydraulic devices in operation and listens to their sounds to locate causes of trouble.Dismantles devices to gain access to and remove defective parts or to locate and adjust wiring,tooling, fittings, etc, which do not reconcile to schematics and drawings.Examines form and texture of machine component to detect imperfections. Inspects questionable components to determine changes in dimensional requirements as shown on drawings, blueprints and/or documentation.Adjusts functional parts of machines, devices and control instruments. Repairs or replaces defective parts.
Keywords:Automation , electrical , electronics , instrumentation , mechatronics , plc , scada , drives , panel designing , hmi , dcs.

Saturday, July 30, 2011

Network Management Engineer-Job Code: CIK-2005

The Network Management Engineer (NME) will be a Subject Matter Expert (SME) in a variety of network management technologies specifically Smarts InCharge as a primary and, secondarily, CiscoWorks and NetIQ AppManager Experience managing and participating in the holistic design and creation of network system management policies. Familiarity with current LAN, MAN, and WAN technologies is required.The Network Management Engineer will perform the following job duties and responsibilities:Demonstrate the ability to implement, document and maintain enterprise network management solutions using Smarts Engineer, configure, install, test, train, and document complex architectures and component configurations relating to routing/switching products and/or solutions; Support the project team and customers;Participate in design and peer reviews;Provide subject matter expertise for the development of proposals (technical writing);Conduct feasibility analysis, technical case studies, and cost estimates; Analyze and transform operational and/or functional needs into solutions while remaining compliant with regulations, policies and procedures; document description of system parameters and integrate those parameters to optimize the overall solutions effectiveness and efficiency at task;Research, analyze, recommend and implement new technologies, standard processes, tools and techniques where applicable using creative and innovative solutions;Research, evaluate and stay current on emerging tools, techniques and technologies; maintain skills and capabilities through education, training, and hands-on experiences;Perform mentoring and training tasks for peers and customers as required; transfer project.
Keywords:Network Configuration Maintenance



knowledge to other team members and customers as required;
Perform risk identification, assessment, remediation, and planning for all aspects of performance;
Perform project engineering and task management functions.

Friday, July 29, 2011

Quality Engineer-Job Code: CIK-2004

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
The Quality Engineer role is responsible as the key liason between manufacturing and the customer,ensuring that overall customer quality and regualtory requirements and expectations are met and product meets all specifications. Understanding of, and primary customer interface for all customer qualityspecificationsandrequirements.Facilitate resolution of proactive quality initiatives; continuous improvements, preventative actions, mistake-proofing, etc.
Keywords:Quality Engineer ,Diploma Mechanical, Able to handle inspection.

Thursday, July 28, 2011

Business Analyst-Job Code: CIK-2003

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
As a member of the Company Customer Operations Strategy and Project Execution group you will be part of a small team that develops strategies and executes projects that are intended to consolidate and simplify the agent tool set. At the direction of the program director and with the assistance of a project manager, the business analyst defines the scope, defines success criteria, gathers business requirements, and guides the project to completion.
Keywords:Business Analyst -Banking SME Banking, Banking Domain ,assets, credit, loans.

Wednesday, July 27, 2011

Pharma Biotech - Analyst-Job Code: CIK-2002

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
The Business Analysts will be integrating data sources to enhance system integration and productivity. The Analysts will be responsible for capturing requirements and following the RUP methodologies.The Business Analysts will work with cross functional project teams and the systems by interacting effectively and working collaboratively with the team. The Analysts will then engage with the assigned developer(s) and guide the application enhancements to ensure they meet the agreed to requirements.The Analysts should be able to manage multiple projects and have a very good understanding of the software development process/lifecycle.
Keywords:" Healthcare", "Pharma",Biotech","Clinical Research "

Tuesday, July 26, 2011

C# .Net Developer-Job Code: CIK-2001

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
Broad understanding of web technologies both .NET and non .NET Experienced at mixed platform software development.Detail oriented software troubleshooting and debugging.Proactive at following industry patterns and practices.Ability to be flexible and function in multiple roles of a team as needs dictate.Skills Required:Knowledge of overall application development experience Web Development - AJAX, Javascript, DHTML.NET Development (3.0 to 4.0) - ASP.NET, WPF / WinForms, WCF / Web Services RDBMS from a development standpoint - Microsoft SQL Server, DB2 Skills Desired: Some experience with J2EE.
Keywords:ASP.NET, WPF / WinForms, WCF / Web

Monday, July 25, 2011

Mobile Application Developer-Job Code: CIK-2000

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
Calling all Mobile Developers! Do you have prior experience publishing applications? Mobile Development is a great field and if you are skilled in developing and deploying robust code, we want to speak with you about advancement in your career! Like most companies, we are experiencing an exciting key phase in our growth, with rapid expansion in products, people and markets. Youll have the opportunity to work with a diverse team of world-class Software Engineers, on an ambitious project that's planning to grow fast and make headlines.Developing and deploying robust client code.Designing, coding, testing and documenting within an agile development environment.
Keywords:Java, C programming, C++, Objective-C, Android,Blackberry.


Sunday, July 24, 2011

Structural Design Engineer-Job Code: CIK-1999

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
The Structural Design Engineer assists to develop, integrate and document structural and interior payload system requirements to establish the system design. Develops, maintains and modifies basic structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs tests to validate and verify systems and components meet requirements and specifications. Assists with supplier development, test and production activities and coordination with the supplier to optimize the design and achieve program goals. Supports investigation of emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general supervision.
Keywords:MECHANICAL, CIVIL, AEROSPACE/AERONAUTICAL ENGINEERING.

Saturday, July 23, 2011

Civil Designer-Autocad-Job Code: CIK-1998

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
This person will be taking notes from the field (surveying data), and transitioning them to engineering drawings. They are looking for someone whose references speak very highly on their technical behalf and their AutoCAD 2010 skills. A qualified candidate will also prepare the pre-design documents for a waste disposal facility the firm is required to build as part of their facility closure contract.
Keywords:Design Engineer, Autocad Draftsman, Electrical autocad draftsman, Engineer- design.

Friday, July 22, 2011

IT Support Hardware Networking Executive-Job Code: CIK-1997

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
Provides network and data security support for the Company to ensure hardware and software operations run efficiently. Installs and enhances current and new revisions of the operating system. Responsible for leading all network administration duties and projects. Manages other IT and business related projects as needed. Manages and supports end-user hardware and software needs, including installation and repair services for PC and Laptop systems, printers, operating systems,application software, mobile devices, and phone systems.Job Description and Duties: - this is just a sample of the duties involved for this position Identify problems, troubleshoot and provide advice and training to assist users. Provide user support for hardware, applications and services. Provide PC, laptop, printer and network break/fix support.Research questions using a variety of manuals and resources to answer all end-user and staffquestions.Adhere to IT standard practices in all aspects of the job.
Keywords:networking executive, hardware executive, network trainee, hardware trainee, it support

Thursday, July 21, 2011

SAP ABAP Application Developer-Job Code: CIK-1996

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
SAP solutions to achieve defined business goals. They maintain skills in SAP applications process design and configuration; SAP application design, development, integration, testing and deployment; and SAP application technical architecture.A Senior Systems Analyst/Senior Team Lead oversees the design, development, delivery and maintenance of technology-based business solutions. He/she is responsible for designing, coding,enhancing and testing software applications to meet business process requirements. He/she supervises the identification and implementation of configuration changes and maintenance of software applications. He/she has some management responsibility for the technology solution and the development of the team.
Keywords:SAP

Wednesday, July 20, 2011

Fresher & Recent Graduates - Multiple Openings-Job Code: CIK-1995

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
Candiates should have a flair for managing the entire office operations,self motivated possess good communication skills and business etiquettes & willing to join immediately.Fresh graduates with ambition to excel and flexible on aspects of management are only encouraged to apply.
Keywords: Freshers, recent graduate, B.Com, B.A, B. Sc, BMS, BMM, junior accounts, admin, trainee, intern, reception, front desk.

Tuesday, July 19, 2011

Customer Support Engineer-Job Code: CIK-1994

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
Serve as the primary support contact and a technical support liaison to specified customers and monitor their email team-lists. Maintain required information of allocated customers including contact points, deployment data, remote access method(s) and other information requested by management.Where necessary, escalate the issues to other team members/team leader/team manager or to other teams in accordance with relevant procedures identified in the Operations Guide.Travel to customer sites in order to assist in issue resolution when needed.Log issues (when a software bug is discovered) in the bug tracking system, reproduce the bug and provide all reasonable data, including the instructions on how the bug is reproduced, to the Product Group to assist them in resolving the issue.Create knowledge base documentation for all resolved issues where an existing document does not exist or the issue is not covered by product documentation.Become Openwave certified in at least one Openwave product and provide input and assist in the creation of relevant certification exams for products and product versions by management instruction.
Keywords:Customer Support Engineer, XML code, technical engineer, troubleshoot

Monday, July 18, 2011

Automotive Design Engineer-Job Code: CIK-1993

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
Automotive Design Engineer, Exterior Systems.Contribute to the design and development of heavy truck hoods. Produce high quality, cost effective part and assembly designs in Catia V5.Analyze field and test failures on hoods and provide solutions.Reduce cost and improve quality of existing hood designs.Detail drawings and create product structure.Write Engineering Work Requests (EWRs), create releases, modify design charts and create Bills of Material (BOMs) to document designs.
Keywords:Design Engineering

Sunday, July 17, 2011

Mechanical Maintenance Supervisor-Job Code: CIK-1992

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
Maintenance supervisors are responsible for directing the workforce in daily maintenance activities to ensure equipment is operational and safe to meet production objectives.Scheduling and planning maintenance to ensure continuous operations and eliminate downtime.Implementing maintenance processes and procedures.Performing scheduled repairs and planning for outages.Tracking maintenance delays.Conducting area inspections.Conforming to environmental and quality standards.Practicing continuous improvement initiatives.
Keywords:Mechanical Maintenance Commissioning

Saturday, July 16, 2011

Customer Service Associate-Job Code: CIK-1991

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
You take ownership of the online merchant issue.You want to solve the challenge on their first call with you.You enjoy the challenge of having the frustrated, angry and at the end of their rope" caller end the call satisfied and thanking you for your assistance.Either full time or part time, you get to solve the issues the first time because you have the ability and the authority to solve many of the challenges you ll face no escalating no callbacks. For you, its about resolving the customer s challenges the first time.
Keywords:Fresher, Under Graduate, MBA Marketing, HR, Day Shift, Excellent Communication, Housewife, Female, Part Time.

Friday, July 15, 2011

Embedded Software Engineer - Fresher-Job Code: CIK-1990

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
Responsibilities include architecture, design, test and documentation of software for embedded high-speed digital communications products for the AV industry.BSC or equivalent (transcripts required).Knowledge programming in C/C++.Knowledge with Freescale 8/16-bit microcontrollers and CodeWarrior IDE.Knowledge with USB, SPI, I2C, TCP/IPKnowledge debugging embedded products in a lab environment.Excellent communication skills, (written, and verbal)Strong attention to details, highly organized, computer literateAbility to work well in a fast-paced professional office environment.
Keywords:USB, SPI, I2C, TCP/IP.

Thursday, July 14, 2011

Construction Project Engineers-Job Code: CIK-1989

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
Qualified construction project engineers, assistant project engineers, office engineers and inspectors for on-site inspection of transportation projects including highways, bridges, drainage structures, SWM facilities and ancillary improvements including utility relocations for both new construction and rehabilitation contracts.Experience Requirements - Experience ranges from a minimum of three years (TET III Level) to a minimum of eight years (TET V Level). Applicants must have demonstrated inspection experience with transportation projects involving Maryland DOT and/or County DPW&T construction standards and specifications. Material Testing Certifications- Material sampling and testing certifications required including MARCTP (Concrete, Soils/Aggregate/Compaction andHMA).Other Required Certifications- SHA Temporary Traffic Control Manager Certification; Sediment & erosion control certifications are also required.
Keywords:Civil Engineering

Wednesday, July 13, 2011

.Net developer - Fresher-Job Code: CIK-1988

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
Junior - Mid - Level .NET Software Engineer for the implementation of Visual Studio 2010 for use in developing cutting edge web based Financial Applications.Are you experienced with .NET 3.5 components like WCF, LINQ and C# 3.0 or VB.NET 9.0? Have you started working with .NET 4.0 and are looking to use it professionally? If you are a .NET Engineer looking to use the latest Microsoft technologies in a software product development environment, please read on! What you need for this position:0 to 2 years of knowledge or experience with C# or VB.NET developing both ASP.NET and Windows applications.Strong Oracle database development skills using PL/SQL (Strong SQL skills are required also)Front end web development experience using HTML, XHTML, CSS, Javascript Libraries (jQuery and JSON), and Ajax.Expert level knowledge and experience with Visual Studio 2008.Bachelor's Degree in Computer Science (Graduate Degree with Business focus is a plus).
Keywords:C# , VB.NET, ASP.NET, SQL, Oracle, PL/SQL, Visual Studio, XML, Javascript, .NET 3.5

Tuesday, July 12, 2011

Software Developers - Freshers-Job Code: CIK-1987

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
Looking for a Software Developers from junior level. You will participate in all facets of the System Development Life Cycle, perform analysis, design requirements, develop project plans, perform unit and integration testing, document systems, train users, and enhance existing systems that have been developed in Window Forms and SQL Server.
Perform analysis, design requirements, construct technical solutions, develop project plans, perform unit and integration testing, document systems, and train users.Work closely with business users to identify requirements and translate requirements into the technical design.
Keywords:Application Software Designing Development.

Monday, July 11, 2011

Automation Engineer - SCADA-Job Code: CIK-1986

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
A successful candidate for this role will be responsible for helping fellow team members with the advancement of SCADA and Field Automation capabilities. Candidate's responsibilities will include:Pipeline SCADA Capability.Identify opportunities for applying the SCADA capability to add value to the business and operations.Work closely with pipeline operations and field operations to improve operations and support business and operations project and initiatives.Implement SCADA modifications to support system changes and participate in on-call rotation for SCADA after hours support.Understand pertinent compliance requirements for remote pipeline operations Pipeline Automation Capability.Identify opportunities for applying the Automation capability to add value to the business and 
operations.
Keywords:sqlserver2000,plc,scada, dcs automation, instrumentation, qtp.

Sunday, July 10, 2011

Trainee Manager-Job Code: CIK-1985

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
A successful Manager Trainee candidate must have excellent communication skills and interact with and work well with others in our fast paced and ever changing industry.Sell lumber and building materials, conduct price quotes, process orders and returns, and develop excellent product knowledge.Create material estimates for customers in a timely manner Synchronize delivery and/or pick ups of customer orders. Quickly resolve customer complaints and problems. Able to prioritize; manage time and orchestrate multiple tasks.Interacts with stores, corporate office, and vendors.Build and maintain strong relationships with customers. Maintaining and merchandising inventory.
Keywords:Trainee

Saturday, July 9, 2011

Civil supervisor-Job Code: CIK-1984

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
Civil supervisor manages multiple site portfolio and is responsible for all operational activities,safety, emergency response, regulatory compliance, collocation, customer interaction,re-development, and development. Site Supervisor may be required to troubleshoot radio repeaters and systems requirements. Ensure 100% compliance with all centrall, State, and Municipal Regulations.Manage the satisfactory completion of Repair & Maintenance (R&M) work completed by sub-contractors or internal crews.Manage the satisfactory completion of Capital Improvement, Development, and Re-development work completed by sub-contractors or internal crews.Timely completion of all inspections. Inspections include, but are not limited to Universal Form, Quarterly Light Inspection, Environmental Audit, Site Inspection.Utilization of dispatching software to optimize and plan out a daily schedule of tickets.Ensure all customer application, leasing and installation activity is completed within the current company required cycle times. Includes, but are not limited to Field Verification, Site Sketch, Notice to Proceed, and Closeout Documentation.
Keywords:Civil Supervisor.

Friday, July 8, 2011

Instrumentation Design Engineer-Job Code: CIK-1983

If images are not displayed, click the above link like "Display images below - Always display images from customerisking@gmail.com"


For Address & Walk-In Interview Venue Details Go To Contact Page & Get Appointment.
Manage and work closely with CAD designers and CAD engineers for drawing and documentation support. Relocation assistance available.Design of one-line diagrams, three-line diagrams, schematics, wire pulling calculations, voltage drop calculations, and BOM Designing instrument loop diagrams, instrument plans, installation details, relay cabinets, terminal box layouts, control panel layouts, P&IDs, and PLC and or DCS systems Manage test equipment requirements and selection.
Keywords:Instrumentation Design.